Dongfeng was one of Chairman Mao’s pet projects back in 1968 but lately the asian automaker has been left behing, even though is one of the largest carmakers in the pentad of China’s auto industry. According to some reports, the Chinese automaker have been eager to build their own brand, and play catch up with other Chinese automotive giants such as FAW, and SAIC, both of whom have launched their own respective brands in recent years.

The Dongfeng Coupe is expected to enter the ‘premium’ sports car market in 2009, and will be powered by an off the shelf Mitsubishi engine. What we’ve seen so far is just a concept, so we’ll have to wait for an actual production car.

The first large-sized car seem to be based on “Kizashi” concept model that would have an engine of up to 3.6 liters, in a bid to attract customers looking to upgrage from smaller vehicles.

In an interview with Reuters in September, Suzuki CEO Osamu Suzuki had flagged the likelihood for the project’s cancellation, saying it made little sense to launch a car into a shrinking segment of the market.

Shares of Suzuki rose 3.4 percent to 1,270 yen, underperforming a 4.3 percent gain in the Tokyo stock exchange’s transport equipment subindex.

FLIR also says its camera is based on the same technology used by the military to provide a 36° field-of-view of the road ahead. Let’s wait for CES to find out more about this innovating system.

We will be able to see the new SRX in production form at this year’s Detroit Auto Show, and while automakers often throw the term “all-new” around, in this case it really applies. The new SRX is very different although many of the greasy bits are shared with other GM vehicles.

A big difference going from the Provoq concept to the production SRX is the powertrain. The old model used a Volt based E-Flex powertrain with a fuel cell range extender. You can read the press release to find out more details.

PRESS RELEASE

2010 CADILLAC SRX: A DISTINCTIVE ALTERNATIVE FOR TODAY’S LUXURY CROSSOVER CONSUMER

DETROIT – Cadillac unveiled the next-generation 2010 SRX Crossover today, featuring a completely new design and more-efficient, high-technology engine choices. The new SRX is a mid-size luxury crossover coming to the North American International Auto Show next week.

“The all-new SRX is a fresh and compelling crossover aimed squarely at the priorities of luxury buyers,” said Mark McNabb, North America vice president, Cadillac/Premium Channel. “With new technologies for increased efficiency and safety, the redesigned 2010 SRX Crossover focuses on both the emotional and pragmatic sides of the luxury consumer.”

The 2010 SRX is designed for efficient performance, including the choice of two high-tech six-cylinder engines that are new to Cadillac – the smallest-displacement engines it offers in North America. A new, 3.0L direct injected V-6 engine is standard and a new, 2.8L turbocharged V-6 is optional. Both engines employ technology that helps produce strong performance that is typical of larger-displacement engines. Direct injection enables a 25-percent reduction in hydrocarbon emissions. Fuel economy in the mid-20s on the highway is expected, but testing isn’t complete.

Performance and safety are enhanced by an available all-wheel-drive (AWD) system that is designed to optimize vehicle handling and stability in all driving conditions. The AWD system includes an advanced electronic limited-slip differential (eLSD) that distributes torque as needed from side to side along the rear axle, as well as from the front to rear axle. The pre-emptive, active-on-demand system provides an extra measure of capability in wet or icy conditions.

The 2010 SRX rides on a wide track that was designed to deliver a nimble, responsive driving experience. It seats five, with generous occupant and cargo room, and can tow up to 3,500 pounds (1,587 kg).

Distinctive design and craftsmanship

“Cadillac is known for bold design. The 2010 SRX Crossover builds on that reputation,” said Clay Dean, Cadillac global design director. “As with the 2008 CTS, we advanced our Art and Science design to create a crossover for style-conscious customers. The exterior features a dramatic diving gesture on the body side to impart the feeling of movement, even at rest.”

A multi-piece shield grille and Cadillac’s iconic vertical headlamps – with light pipe technology and available adaptive forward lighting – are the face of the SRX. They blend into a tightly wrapped, sweeping body that tapers downward at the rear, giving the vehicle a sporty profile, Dean said.

The SRX features a wide stance, minimal overhang and wheels pushed to corners. Eighteen-inch wheels are standard and 20-inch wheels are offered. A bold accent line dives across the body side and culminates at a chrome front fender vent that incorporates a side marker lamp. An integrated spoiler on the rearward edge of the roof extends the sleek lines and improves aerodynamics.

“Inside the new SRX, technical precision blends with old-world craftsmanship,” Dean said. “Hand-cut-and-sewn coverings on the instrument panel and ambient lighting details convey a finely tailored cabin.”

An integrated center stack houses controls for climate and audio systems, while the navigation system rises from the center of the instrument panel. A signature example of the SRX’s attention to detail is the Cadillac script logos in the front door sill plates that illuminate when the doors are opened.

Advanced technology and entertainment systems

The 2010 SRX features numerous advanced electronic systems. Highlights include a “pop-up” navigation screen with three-dimensional imaging; adaptive forward lighting that swivels the headlamps in synch with vehicle steering; power liftgate with adjustable height setting; integrated hard disc drive for audio storage and a dual-screen system for rear entertainment.

Bluetooth compatibility is standard, as is OnStar’s turn-by-turn navigation service for buyers who do not select the car’s navigation system option.

Efficient performance

The SRX is powered by a new, fuel-efficient direct injected 3.0L V-6 that delivers an estimated 260 horsepower (193 kW) and is paired with a six-speed automatic transmission. Direct injection results in more power, better fuel economy and lower emissions, all will a smaller-displacement package. As a result, the new V-6 engine is expected to raise the SRX’s standard power rating by 5 horsepower, while achieving an estimated 1 0-15-percent fuel economy improvement.

The 3.0L direct injection V-6 is a smaller-displacement version of the 3.6L, direct injection engine featured in the CTS sport sedan and named one of the world’s 10 Best Engines for 2009 by Ward’s Automotive. Along with direct injection technology, the 3.0L engine employs variable valve timing to optimize power and fuel efficiency and reduce emissions.

The Hydra-Matic 6T70 six-speed automatic transmission helps save fuel by lowering the engine’s rpm at constant highway speeds, while manual shift control enables greater driver interaction when desired. The new SRX includes a driver-selectable “eco mode” that alters transmission shift points to maximize fuel economy.

“The 2010 SRX will deliver excellent, balanced driving dynamics in all types of weather,” said Bob Reuter, global vehicle chief engineer. “The all-wheel-drive system with electronic limited slip effectively transfers torque not only from front to rear, but also along the rear axle. This system sets a new benchmark for all all-wheel-drive systems, giving the driver control and confidence on any road surface.”

Traction control is taken a step further on AWD models with the rear eLSD. In icy or wet conditions, the system can transfer up to 100 percent of torque to the wheel that has more grip. The eLSD also gives the driver enhanced control when cornering hard or completing a high-speed maneuver, such as a lane change, by momentarily applying more or less torque to either of the wheels to help the rear of the vehicle more closely follow the direction of the front wheels.

The suspension includes a real-time damping system in conjunction with AWD that adjusts shock damping rates in response to road conditions for a smooth ride quality.

Enhanced safety

SRX’s safety features are designed to protect occupants before, during and after a crash. A strong body structure and chassis that absorbs crash energy is complemented by the use of martensitic steel in the fully enclosed rocker sections. Martensitic steel is one of the strongest available and its use in the rockers helps protect against intrusion during a side-impact crash, while also maintaining the structure during front and rear crashes.

Additional safety features include standard head curtain side air bags, standard front seat-mounted pelvic/thorax side air bags, front safety belts with dual pretensioners and load limiters, rollover mitigation sensors, a pedal release system, trailer stability assist and OnStar.

The SRX was also designed to meet European pedestrian protection standards; and the front bumper is positioned for greater compatibility with car bumpers.

Production begins in the second quarter of 2009, with dealer availability shortly thereafter.

PRELIMINARY SPECIFICATIONS

Models:
2010 Cadillac SRX

Body style / driveline:
five-door, 5-passenger front engine transaxle; front-wheel-drive/all-wheel-drive mid-luxury crossover vehicle

Construction:
steel body frame integral; galvanized steel front fenders, hood, roof, door panels, one-piece bodyside outer panel, and liftgate

EPA vehicle class:
sport utility vehicle

Manufacturing location:
Ramos Arizpe, Mexico

Key competitors:
Lexus RX; Acura MDX; BWW X3 and X5

Engines

3.0L DOHC V-6 direct injection, variable valve timing, four valves per cylinder
2.8L DOHC Turbo V-6, four valves per cylinder

Displacement (cu in / cc):
182 cu in / 2986 cc
170 cu in / 2792 cc

Bore x stroke (in / mm):
3.50 x 3.16 in / 89 x 80.3
3.50 x 2.94 in / 89 x 74.8

Block material: aluminum
Cylinder head material: aluminum

Valvetrain: DOHC, 4 valves per cylinder

Ignition system:
coil-near-plug
pencil Coil

Fuel Delivery:
high-pressure direct injection
PFI returnless

Compression ratio:
11.7:1
9.5:1

Horsepower (hp / kw @ rpm):
260 / 193 @ 6950 (est)
300 / 224 @ 5500 (est)

Torque (lb-ft / Nm @ rpm):
221 / 300 @ 5600 (est)
295 / 400 @ 1850 (est)

Recommended fuel:
regular unleaded; E85 capable
premium unleaded

Max engine speed (fuel cut-off):
7100
6500

Emissions Controls:
dual close-coupled catalysts and single underfloor catalyst; variable valve timing, evaporative system
dual close-coupled catalysts

Fuel economy (city / hwy)
TBD
TBD

Transmissions

6T70 Hydra-Matic six-speed transverse, electronically controlled, automatic overdrive transmission
AF40 Aisin Warner six-speed transverse, electronically controlled, automatic overdrive transmission

Chassis and Suspension

Front suspension:
independent, strut-type, specifically tuned coil springs, direct-acting stabilizer bar (hollow); hydraulic ride bushings

Rear suspension:
linked H-arm, hollow stabilizer bar; real-time damping available

Traction control:
all-speed using engine torque reduction and brake intervention

Steering type:
specifically calibrated hydraulic-power-assisted rack-and-pinion for V-6 models

Steering wheel turns, lock-to-lock
2.84
Turning circle, curb-to-curb (ft / M):
40.3 / 12.2

Steering ratio:
16.5:1

Brakes

Four-wheel power-asssited disc with ABS (and ESC); vented front and rear rotors; aluminum calipers front and rear (two-piston front calipers, single-piston rear calipers)

Brake rotor diameter – front (in / mm):
13.6 / 345 x 1.2 / 30

Brake rotor diameter – rear (in / mm):
12.4 / 315 x 0.9 / 23

Total swept area (cu cc):
front: 179.4
rear: 72

Wheels and Tires

Wheel size and type:
18-inch aluminum (std on all models)
20-inch aluminum (opt on all models)

Tires:
P235/65R18 AL3
P235/55R20 AL3 or 235/55R20 HW4

Exterior Dimensions

Overall length (in / mm): 190.2 / 4833
Overall width (in / mm): 75.1 / 1910
Overall height (in / mm): 65.6 / 1668
Wheelbase (in / mm): 110.5 / 2807
Front track (in / mm): 64.0 / 1626
Rear track (in / mm): 63.7 / 1620

Interior Dimensions

Seating Capacity (front / rear): 2 / 3

Headroom (in / mm):
front: 39.7 / 1009
rear: 38.4 / 976

Legroom (in / mm):
front: 41.2 / 1047
rear: 36.3 / 923

Shoulder room (in / mm):
front: 58.3 / 1481
rear: 56.2 / 1430

Hip room (in / mm):
front: 55.4 / 1408
rear: 54.7 / 1391

EPA passenger volume (cu ft / L) : 100.6 / 2848.6
EPA interior volume (cu ft / L): 129.8 / 3675.5
Cargo volume behind first-row seats (cu ft / L): 61.18 / 1732.4
Cargo volume behind second-row seats (cu ft / L): 29.20 / 826.8

Capacities

Trailer towing maximum (lb / kg):
3.0L: 2500 / 1136 (without towing package)
3.0L: 3500 / 1590 (with towing package)
2.8L: 3500 / 1590 (with towing package)

Maximum tongue weight (lb / kg): 350 / 158

Fuel tank (gal / L): 21 / 79.5

Cooling system (qt / L):
3.0L: 12.4 /11.7
2.8L: 12.6 /11.9

The top version of the new Mustang is propelled by a V8 supercharged engine that develops no less than 540 HP and approx. 690 Nm. And that`s not all…

This model is equipped with rear-wheel traction, 6-gear manual transmission and improved suspension. And they all come with a very aggressive look. The new Shelby GT500 has a modified body kit, air intakes for the hood, new spoiler and 19 inch rims.

The new Shelby GT500 will be built at the Auto Alliance factory in Flat Rock, Michigan, and can be seen in showrooms this spring.

MORE PICTURES BELOW ! CLICK TO ENLARGE !

]]> http://www.auto-a-holic.com/say-hello-to-the-new-ford-mustang-shelby-gt-500/feed/ http://www.auto-a-holic.com/auto-a-holiccom-is-back/ http://www.auto-a-holic.com/auto-a-holiccom-is-back/#comments Mon, 05 Jan 2009 09:27:25 +0000 Boata Radu http://www.auto-a-holic.com/?p=1013 The Holidays are over so it’s time for us to get back to work . Starting now, our feed will be filled with new articles , new spy-shots, new premiers, new test drives, and many , many other goodies .

I`m proud to announce that around June we’ll organise a contest with many and attractive prizes, especially for our readers . Anyone can join, but our subscribers will get 1 to 5 extra points, depending on the time that he/she has been our subscriber.  But enough of this now, let’s not spoil the surprise. If you want to subscribe , just click here!

We wish that all of you will have a beautiful and productive 2009 !

I would like to thank all of you, our readers and subscribers for visiting our blog daily, to our collaborators AutoItalia for giving the chance to test some our their cars and to all members of Auto-A-Holic.com for making a good job. We wish all of you “Happy Holidays!” and we hope the next year will bring us more success than this one brought us. Thanks again and “Happy Holidays!”

For our German readers : Frohe Feiertage!
For our Romanian readers : Sarbatori Fericite!
For our Brazilian readers : Boas Festas!
For our french readers : bonnes fêtes!
For our Turkish readers: Mutlu bayramlar!
For our Swedish readers : God Jul och Gott Nytt År!
For our Russian readers : Веселых праздников!

The model that appears in these images is the work of a young  Colombian, Leon Paz, designed in a stage of practice at Honda Americas. The concept has attracted the attention of Honda, which may apply to this study in the future, to start a new project.

The Acura 2+1 Coupe, as the name suggests, explores a not very known configuration, until now at least, of 2 seats in the front and one in the back. The ideas is not bad at all, because in 95% of the cases, not more than three persons will travel at the same time in a coupe.

Another interesting and innovative detail, is the panoramic roof extension to the front , over the engine.  Until now, we have seen car companies who created their models with the “heart” in plain sight, but none that shows us both the passenger and engine comportment.

This project remains a beautiful dream, but one that can be reality one day, especially that the young Colombian didn`t go too far from the specifics of the Honda brand.

MORE PICTURES BELOW ! CLICK TO ENLARGE !